Applications
Repair Mortar is suitable for :
Concrete repair work
Crack filling & Leveling
General repair applications
Availability
Product available in 20kg bags
Recommenced Water Addition Ratio
One 20kg bag of Repair Mortar requires approximately 3 - 4 litres of pure water to provide workable mix.
Directions for Use
Place the required amount of Dry-Mix Wall Plaster into a mixer or onto a non-absorbant surface.
Add potable water gradually ensuring that it does not wash away any cement and mix thoroughly to ensure an even and consistant mix.
Note: Add only enough water to make a workable mix, and do not add excessive water as this will weaken the Dry-Mix Wall Plaster. The recomended amount of water should be added to ensure that the plaster is moist enough to bond to the wall surface, but not so wet that it sags or runs down.
Remove all loose flaking materials expose the surface completely and free from laitance, grease,
oils, mould release agents curing membranes, paints, coatings etc. It is recommended to wet the
area to be repaired prior to use complete all plumbing or other works in the area. Fill all voids,
corners etc. or any other defect in the surface prior to starting the work.
Dampen the work area with water before application
The application should be in layers each layer should not exceed more than 5mm in thickness. Allow
first coat to initially set and commence application of second coat, additional layers if required
to be applied as above.
For external sand finish, sponge the partially set mortar in circular movements until desired
sand finished surface is attained
All tools and equipment should be cleaned with water after use
Do not re-temper the mortar if it stiffens. Discard the stiffened product and make a new mortar.
Features & Benefits
Designed to meet the exacting needs of concrete repair and leveling
Ready to use product just requiring the addition of clean water
Quality premixed product specifically formulated for plastering applications
Excellent workability
The Repair Mortar is designed to retain moisture, to assist natural
hydration process especially at warm to hot temperature