Applications
Wall plaster is suitable for :
External plastering
Interior plastering
General plaster applications
Availability
Product available in 40kg bags
Recommenced Water Addition Ratio
One 40kg bag of Rapid Set Concentrate requires approximately 18 - 20% by weight of pure water to provide workable mix
Coverage
Clay Bricks @ 10-20 mm - 20 sq.ft
Cement Blocks @ 10-mm-20mm - 25 sq.ft
AAC Blocks @ 6 - 15 mm - 30- 40 sq.ft
Directions for Use
Place the required amount of Dry-Mix Wall Plaster into a mixer or onto a non-absorbant surface.
Add potable water gradually ensuring that it does not wash away any cement and mix thoroughly to ensure an even and consistant mix.
Note: Add only enough water to make a workable mix, and do not add excessive water as this will weaken the Dry-Mix Wall Plaster. The recomended amount of water should be added to ensure that the plaster is moist enough to bond to the wall surface, but not so wet that it sags or runs down.
Surface must be free of dust /loose particles, grease, mould oil, rust metal, wood peels, paints and plastics.
Pre-wetting of substrate: Surface must be dampened / moistened before the application of Plaster. Ensure there is no stagnant or frequent water flow on substrate while applying the plaster.
The material should be applied within 2 hours of preparation. The Plaster can be applied by hand or spraying machine to the required thickness. For spray application approx. 22-24% of water is required, by weight of dry material. Product is designed in a such way that, it can be applied even
up to 20mm thick in a single coat.
All tools and equipment should be cleaned with water after use.
Do not re-temper the mortar if it stiffens. Discard the stiffened product and make a new mortar.
Curing of the plaster must be done 3 to 4 times a day, for 2 weeks for best result.
Features & Benefits
Designed to meet the exacting needs of masonary work
Ready to use product just requiring the addition of clean water
Quality premixed product specifically formulated for plastering applications
Excellent workability
Designed to ensure smooth finish
This Wall Plaster mix is designed to retain moisture to assist natural hydration process especially at warm to hot temperature