facebookimg
BuildersMART Launches
Mobile App

Get deals, discounts & more

Play Store App Store
Get BuildersMART App
9339330099 9339330099
Cart Rs.0.00

You have no items in your shopping cart.

Post Requirement

For any enquiry call

9339330099

Post Requirement

Fill the following details. Our executives will get back to you shortly.

Compare Products 0
Compare Products 0
X

LATICRETE® 111 + 4237 - Tile Adhesive

Write Your Review

LATICRETE® 111 + 4237 - Tile Adhesive

Availability: In stock

M.R.P: Rs.900.00 per Piece

* Inclusive of all Taxes

Latex Fortified Thin-Set Adhesive
Delivery
Usually Delivers in 12 to 48 hours
Shipping
Free shipping on all orders* (Subject to order value)
Easy Payment Options
  • Net banking & Credit/ Debit/ UPI
  • Cash on Delivery
  • Demand Draft / Cheque / Money order

Product Description

    LATICRETE® 111 CRETE FILLER POWDER
    LATICRETE® 111 Crete Filler Powder is a factory prepared blend of carefully selected raw materials, portland cement and graded aggregates. Designed for use with LATICRETE® 73 Crete Admix to produce high strength adhesive for fixing all varieties of small to large format tiles and stones.
    LATICRETE® 4237 HIGH PERFORMANCE LATEX ADMIX
    LATICRETE® 4237 Latex Admix is a specially designed High Performance Latex additive for use with LATICRETE® 111 Crete Filler Powder to make high strength thin bed adhesive. It is suitable for installation of all types of ceramic tile, vitrified tile, natural stone & agglomerates. It has superior bond strength & is flexible and also highly resistant to shock & impact. These features make it a premium choice for installation of tile & stone in high demanding areas such as external facades, industrial floor, high traffic areas etc.
    Feaures & Benefits
  • Superior bond strength
  • Flexible and shock & impact resistant
  • Rated for extra heavy traffic conditions
  • Proven versatility
    Product Details
  • LATICRETE® 111 Packaging
  • 20 Kg Bag
    Coverage
  • Approx. 55-60 sq. ft per 5 ltrs, mixed with 20 kg bag LATICRETE® 111 Crete Filler Powder / Adhesive using a ¼” x ¼” (6mm x 6mm) square notch trowel for a bed of 3 mm.
    Color
  • Grey and White (L111)
    Certification:
  • ANSI: A118.4, EN 1348 or ISO 13007 for C2TES1
  • ISI: TYPE 2 ADHESIVE
  • VOC: Nil
  • LATICRETE® 4237 Packaging
  • 20 Ltr
    Coverage
  • Varies by application
    Color
  • Grey and White
    Certification:
  • ANSI: A118.4, EN 1348 or ISO 13007 for C2TES1
  • ISI: TYPE 2 ADHESIVE
  • VOC: Nil
    How to apply
  • Substrates:
  • The surface to be covered with tile/stone shall be sound and confirm to good design, rigid, clean and free of dirt, oil, grease, curing compounds, form release agents or loose plaster and paint. For economy the surfaces should be level and true within: Walls – 3mm in 2.5m Floors – 1.5mm in 1.0m
    Note:
  • The Gypsum wallboard shall be fixed as per the manufacturer’s guidelines. Ensure the gaps between two adjoining boards are treated with a filling material or tape so that the adhesive is not allowed into the joints
  • Gypsum wallboard is not a suitable substrate for exterior tile installation or interior areas subject to constant water exposure
  • The joints between two Gypsum wallboards should be continued through to the top of the tile. At no point of time, tiles should be installed directly on the joints
    Surface Preparation:
  • Ensure the surface of Gypsum board is clean and free from impurities like dust, dirt, debris, oil, grease, curing agents, loose plaster etc.
  • Dampen lightly, the surface before application of thin-set adhesive.
  • Clean the back of tile/ stone for any dust or coating.
    Mixing:
  • The products can be mixed by hand or slow speed electric drill mixer (less than 300 rpm). Pour LATICRETE® 4237 in a clean container and then add the powder LATICRETE® 111 and mix until the mixture becomes creamy and plastic. Do not over mix. Leave the mix to slake for 5-10 min and remix before use. Mix only sufficient quantity of adhesive for an immediate need.
    Proportion:
  • Approximately 1 bag of LATICRETE® 111 with 5.5 ltrs of LATICRETE® 4237. Adjust the quantity of liquid to obtain proper consistency.
    Installation:
  • Wet the surface and remove the excess water before applying the adhesive. Ensure the area is shaded from sunlight. The adhesive shall be applied with the flat side of the trowel using a scraping motion to work the material into good contact with the surface to be covered.
  • Additional mortar is then applied with the notched edge of the trowel.
  • When installing large tiles/ stones, spread adhesive onto the back of tile in addition to trowelling material over the surface to be tiled. Select proper type of notched trowel.
  • Thin Tiles upto size 300 X 300 mm, use a square notched trowel of size 6mm X 6mm to provide a total thickness of 3mm
  • Large Porcelain Tiles upto 450 X 450 mm with ribs, use a square notched trowel of size 6mm X 6mm and back butter the tile with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 4.5 mm
  • Large Porcelain Tiles upto 600 X 600 mm with ribs, use a square notched trowel of size 6mm X 9mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 6mm
  • The most important standard to keep in mind is to insure that the piece of tile is completely bedded in the mortar or adhesive with 100% coverage.
  • Rear face of tiles (especially Porcelain tiles) should be cleaned with the damp sponge to clean all the dust. Do not saturate in water.
  • Excess mortar on adhesive shall be cleaned from the surface of the stone with wet cloth or sponge while the mortar is fresh.
    Areas of Application
  • Designed for installation of all types of ceramic tile, Vitrified tile, brick, natural stone and agglomerates. LATICRETE® 4237 Latex admix offers the speed and economy of adhesives with the permanent, water-resistant dependability of portland cement
    Suitable Substrates
  • Not Mentioned

Product Specifications

Additional Information
SKU CCADHVMYK0001
Size N/A
Brand / Manufacturer MYK Laticrete
Recommended Deals N/A
Previous Price N/A
Product Price Label Piece
Manufacture' s Information N/A

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Buying Guide

Ratings & Reviews

Write Your Own Review

You're reviewing: LATICRETE® 111 + 4237 - Tile Adhesive

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Value
Quality
Price
Loading...