facebookimg
BuildersMART Launches
Mobile App

Get deals, discounts & more

Play Store App Store
Get BuildersMART App
9339330099 9339330099
Cart Rs.0.00

You have no items in your shopping cart.

Post Requirement

For any enquiry call

9339330099

Post Requirement

Fill the following details. Our executives will get back to you shortly.

Compare Products 0
Compare Products 0
X

Rebar Coupler - 16mm

Write Your Review

Rebar Coupler - 16mm

Availability: In stock

M.R.P: Regular Price: Rs.69.50

Sale Price: Special Price per Piece Rs.49.50

* Inclusive of all Taxes

28% off
Prices are Exclusive of Taxes
Delivery
Usually Delivers in 12 to 48 hours
Shipping
Free shipping on all orders* (Subject to order value)
Easy Payment Options
  • Net banking & Credit/ Debit/ UPI
  • Cash on Delivery
  • Demand Draft / Cheque / Money order

Product Description

WHY USE REBAR COUPLERS?
  • The Traditional methods of lapped joints are not always an appropriate means of connecting reinforcing bars. Lapped joints are dependent upon the concrete for load transfer. The use of laps can be time-consuming in terms of design and installation and the increased amount of rebar creates congestion within the concrete.
  • Couplers are designed to mechanically join two bars together. By creating an end-to-end bar connection, a continuous load path is created from one bar to another that is independent of the condition and quality of the concrete. Mechanical splices are reliable under conditions of cyclic loading into the inelastic range and prove to be advantageous at the locations where inelastic yielding may occur. BENEFITS OF COUPLERS
  • Spliced rebar performs like continuous reinforcement due to the mechanical joint, unlike lapping which has a complete dependency on concrete.
  • Steel wastage is reduced significantly. Using couplers saves lap length steel. A 12m rebar can be divided into 3m or 4m as bars as required which also prevents the wastage of end pieces of steel.
  • Staggering of bars not required.
  • Bar cross-sectional area is not reduced.
  • Couplers used as a replacement to dowel bars which also saves formwork material.
  • Steel congestion is reduced due to the elimination of laps.
  • Using couplers provides superior cyclic performance as compared to lap joint.
  • Easy to install and no torque wrench required. FEATURES OF COUPLERS EN material is used for manufacturing couplers. Reinforcing bar couplers having high carbon contents have high strength and in addition to greater thickness are more sustainable and effective. Reinforcing bar coupler helps to increase the pace of execution and the quality of projects. It can simplify the design and construction of reinforced concrete and reduce the amount of reinforcement required, which is now a valuable national resource. No torque wrench is required for assembling, reinforcing bar couplers. Hand tightening of the bar or coupler is sufficient. Our couplers can be used in power plant, bridges and all types of R.C.C structures CODE SPECIFICATION In India, the structural consultant is free to define the code to which the couplers used for the project. I. ACI: 318 – 2008:
  • Type 1 joint required to achieve 1.25Fy as a minimum, e.g: For Fe500 the tensile strength expected is at least 625 N/mm2 (Clause 12.14.3.4).
  • Type 2 required to comply with 1.25Fy requirement and also meet the specified tensile strength of the rebar. E.g: For Fe500 the ultimate stress expected from the same is at least 700 N/mm2. II. BS 8110 – Part 1, Section 3, 1989:
  • Specifies tensile testing and slip test for the joint for acceptance of the sample.
  • Testing the coupler of a precise type, the permanent elongation after loading to 0.6fy should not exceed 0.1mm. E.g: For grade 460 the tensile strength should exceed 497 N/mm2. III. IS 1786 – 2008:
  • Type 1 – For Fe500 is considered acceptable for use anywhere in the structure if it meets ultimate strength of 545 N/mm2 which is much lesser than the 1.25Fy. (Clause 8.1 –Table 3).
  • Type 2 – Condition becomes at least 625 N/mm2 as well. IV. IS 16172 – 2014:
  • 1. Manufacturers code for production of couplers.
  • 2. Coupler to be designed for Fe550 grade.
  • 3. Only tests recommended for acceptance on projects is static tensile tests.
  • 4. Example, Fe500 rebar breaking at a stress of 580 N/mm2 is acceptable as per IS 1786 requirement of 545 N/mm2.
  • Product Specifications

    Additional Information
    SKU TMRBCPVBG0001
    Size N/A
    Brand / Manufacturer Vibgyor
    Recommended Deals Yes
    Previous Price N/A
    Product Price Label Piece
    Manufacture' s Information N/A

    Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

    Buying Guide

    Ratings & Reviews

    Write Your Own Review

    You're reviewing: Rebar Coupler - 16mm

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars
    Price
    Value
    Quality
    Loading...